| Revolving Punch - for professional and industrial use |
|
|
Osborne
No.155
Six tubes punch made with tubes 1,2,3,4,5,6 or 0, 1, 2, 3,5 & 7. This punch is known as the best Revolving punch made. The frame is made of forged steel, highly polished. Cutting tubes are turned fron special carbon tool steel and threaded to allow easy replacement. These tubes are indivually hardened. The reach or distance from the cutting tube to the back of jaw is 1 1/2". Weight each size 14 oz. Size 0-7 provided unless specified other wise. Note: Numbers 155,153 and 223 tubes are not interchangeable. No. 155 punch takes up to size 6 and 7 only as indicated on the cylinder of the punch. Punch tubes measure 3/4" overall.
Osborne No. |
Description
|
155 1-6 |
Revolving punch |
155 1-7 |
Revolving punch |
155 - A |
Extra anvil |
155 HS |
Extra handle spring |
155 SP |
Extra side spring |
155T 0-7 |
Set of replacement tubes |
155T 1-6 |
Set of replacement tubes |
|
 |
|
|
|
| Spring
Punch - for professional and industrial
use |
|
Osborne No.153
Forged steel frame. Highly polished. Fitted with replaceable screw tubes. The reach or distance from the cutting tube to the back of jaw is 1 1/2". Made in sizez 000 to 10 weight each 14 oz. Note: There are three different frames. Tubes sizes 000 to 7 fit the same frame and are interchangeable.Tube 8 fits No.8 frame only. Tubes 9 and 10 fit the same frame and are interchangeable. Punch tubes measure 1-1/8" overall.
Osborne No. . |
Description |
Osborne No. |
Description |
153-000 |
Spring Punch |
153-6 |
Spring Punch |
153-00 |
Spring Punch |
153-7 |
Spring Punch |
153-0 |
Spring Punch |
153-8 |
Spring Punch |
153-1 |
Spring Punch |
153-9 |
Spring Punch |
153-2 |
Spring Punch |
153-10 |
Spring Punch |
153-3 |
Spring Punch |
153-A |
Extra anvil |
153-4 |
Spring Punch |
153-Hs |
Handle spring |
153-4 |
Spring Punch |
|
|
|
|
|
|
|
| Cutting Tubes |
|
Osborne
No.153T-$8.16 and Osborne 155T-$6.24
153 Tubes |
Size No. |
Diameter Size |
UPC
No. |
|
155 Tubes |
Size No |
Diameter Size |
UPC
No. |
|
000 |
3/64 |
52150 |
|
|
- |
- |
- |
| |
00 |
1/16 |
52152 |
|
|
00 |
1/16 |
52022 |
| |
0 |
5/64 |
52154 |
|
|
0 |
5/64 |
52024 |
| |
1 |
3/32 |
52156 |
|
|
1 |
3/32 |
52026 |
| |
2 |
7/64 |
52158 |
|
|
2 |
7/64 |
52028 |
| |
3 |
1/8 |
52160 |
|
|
3 |
1/8 |
52030 |
| |
4 |
5/32 |
52162 |
|
|
4 |
5/32 |
52032 |
| |
5 |
11/64 |
52164 |
|
|
5 |
11/64 |
52034 |
| |
6 |
3/16 |
52166 |
|
|
6 |
3/16 |
52036 |
| |
7 |
13/64 |
52168 |
|
|
7 |
13/64 |
52038 |
| |
8 |
1/4 |
52170 |
|
|
- |
- |
- |
| |
9 |
9/32 |
52172 |
|
|
- |
- |
- |
| |
10 |
5/16 |
52174 |
|
|
- |
- |
- |
|
|
|
|
|
| Revolving Punch (Nickel Plated) |
|
Osborne No. 223 - $13.54
A fine quality pressed frame revolving punch with drive tubes. All tubes are heat treated to give long wear. Furnished with tubes sizes: 0 (5/64"), 1 (3/32"), 2 (7/64"), 3 (1/8"), 4 (5/32") & 6 (3/16").
Length (inches)
|
Weight ea (oz)
|
UPC
No. |
8 1/2 |
6 |
02290 |
|
|
|
|
|
| Spring
Punch - Nickel plated |
|
Osborne No.220-0 $13.58
A sturdy pressed steel punch with replaceable drive tubes. non-removable anvil. Frame furnished with size 0 tube or 00 tube.
Length (inches) |
|
Weight
ea (oz)) |
UPC
No. |
|
|
|
|
8 |
1 1/4 |
7 |
52260 |
|
|
|
|
Extra Tubes |
00 |
0 |
1 |
2 |
3 |
4 |
6 |
|
|
|
|
|
| Spring
Punch - Nickel plated |
|
Osborne No.248 $10.36
A sturdy pressed steel punch with replaceable tubes. Compact, ruggedly constructed. Fits any hand comfortably.
Osborne No. |
Length (inches) |
|
Weight
ea (oz)) |
UPC
No. |
|
|
|
248-00 |
6 |
3/4 |
4 |
52270 |
|
|
|
248-0 |
6 |
3/4 |
4 |
52272 |
|
|
|
| |
Extra Tubes |
00 |
0 |
1 |
2 |
3 |
4 |
|
 |
|
|
|
| Three Way Craft Kit - Nickel plated |
|
Osborne No.203- $ 32.34
A multi-purpose punch consisting of an Osborne No. 220 Spring punch and the following attachments: Two way spacing gauge, brass anvil, tubes size 1 and 7, single prong slitter and eyelet setting dies.Weight per kit 14 oz. Upc No.67262
Extra Attachments |
Osborne No. |
Description |
UPC
No. |
| |
203-3/32 |
1 Prong chisel |
17264 |
| |
203-C |
3 Prong chisel |
17268 |
|
203-A |
Large anvil |
17266 |
|
| Mini-Punch Set |
|
Osborne No. K-157 - $25.38
A special punch set for cutting small, precise holes in soft materials where throated or plier punches won't reach. Set has a round handle with slot inside to clear punchings. Handle is threaded to accommodate the seven replaceable screw tubes screw tubes which are shown below. Set consists of seven tubes and handle. |
Tube size
No. |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
Weight per
set (oz) |
UPC
No. |
Tube size
(inches) |
5/64 |
3/32 |
7/64 |
1/8 |
5/32 |
11/64 |
3/16 |
8 |
01860 |
|
|
|
|
|
| Belt Punch (Round Shank) |
|
Osborne No. 245 - $5.24
Hardened cutting edge - milled clearing hole. Polished barrel.
Size No. |
2 |
Diameter Size |
1/8 |
Weight ea (oz) |
1 |
UPC No. |
51466 |
|
|
|
|
|
